Positions allowed :

Positions allowed Print

Created by: Andrew Gibbs

Modified on: Fri, 13 Sep, 2019 at 9:36 AM

Positions allowed

Positions allowed allows you to build a long or a short on a long & short system.

If you have built a long & short system, and wish to convert it to a long only system.

or convert optimize it long only (or short only) you can change positions allowed to LongOnly.

Then select the system(s) , and apply over ride original settings.

You can then walk forward, and or do verification on what is now a long only system.

You could then do the same for a short only system, and then combine both the systems on one chart.

Builds prior to 54.57 allowed a building of a long or short or long & short system, but did not allow you change this once the system was made.

Shown below is the system running both a long and short.

The parameters in cyan could be different for long and short, though in example shown they are the same.

Trademaid.info & Zwag Family Trust

Andrew is the author of this solution article.

Did you find it helpful? Yes No